cutter teeth中文是什么意思

• 牙轮齿

• "cutter"中文翻译    n. 1.切者；裁衣人；【电影】剪辑员。 2.切刀，切断 ...
• "teeth"中文翻译    n. tooth 的复数。
• "constant outline teeth cutter" 中文翻译 :    成形齿铣刀; 定型齿铣刀
• "cutter with inserted teeth" 中文翻译 :    镶齿铣刀
• "nicked teeth milling cutter" 中文翻译 :    切齿铣刀
• "pitch of cutter teeth" 中文翻译 :    铣刀齿节
• "replaceable cutter teeth" 中文翻译 :    可更换刀齿
• "slitting cutter with coarse teeth" 中文翻译 :    粗齿切口铣刀
• "slitting cutter with fine teeth" 中文翻译 :    细齿切口铣刀
• "sharp teeth profile milling cutter" 中文翻译 :    尖齿铣刀
• "spiral flute twin teeth milling cutter" 中文翻译 :    螺旋槽沟齿铣刀
• "taper end milling cutter with fine teeth" 中文翻译 :    细齿锥柄立铣刀
• "in the teeth" 中文翻译 :    直接反对, 当面, 公然
• "in the teeth of" 中文翻译 :    对抗, 不顾
• "of such teeth" 中文翻译 :    磨牙的
• "s teeth" 中文翻译 :    侥幸
• "teeth" 中文翻译 :    n. tooth 的复数。
• "teeth the" 中文翻译 :    蒂斯山
• "the teeth of" 中文翻译 :    当面反抗
• "to the teeth" 中文翻译 :    当面; 完全地, 充分地
• "cutter" 中文翻译 :    n. 1.切者；裁衣人；【电影】剪辑员。 2.切刀，切断机；刻纹[录音]头，利齿，门牙，前牙。 3.〔美国〕(单马)小橇；〔美俚〕检察官。 4.【海军】小汽艇；独桅前后帆快船。 5.砌面砖。 6.〔美国〕老牛。 a life cutter 救生艇。
• "t-cutter" 中文翻译 :    下形刀; 形刀
• "the cutter" 中文翻译 :    刽子手
• "notched teeth syphilitic teeth" 中文翻译 :    锯齿形牙
• "pitch (of teeth); teeth space" 中文翻译 :    齿距

• Based on the cutting experiments used by cutter tooth and point - attack pick on the press and cutting simulation test table , the deformation and failure process of coal body are studied by the method of white light digital speckle correlation
  摘要采用白光数字散斑相关测定方法，在压力机上，在截割模拟实验台上分别对煤试件进行刀齿、镐齿的截割实验，研究被截割煤体的变形破坏过程。
• Abstract cutter teeth and gear teeth are simplified as mechanical models , the bending deformation at contact nodes is calculated by applying the three - dimension finite element method and analyzing their mechanical condition , the relation curve between shaving force and bending deformation is drawn out
  简介：摘要将刀齿和轮齿抽象简化为力学模型，分析其受力状态，并运用三维有限单元法计算各节点的弯曲变形量。
• The results indicate that a stable deformation localization band occurs in the coal cutting course and develops to macroscopic crack ; the deformation localization band is slantwise ; while the cutter tooth is used , the deformation localization develops slowly , and the localization becomes wider and the strain value in the band area higher afterwards ; when the point - attack pick used the localization develops quickly and the localization band becomes narrow and the strain value in the band lower
  研究表明：截齿截割煤体过程中，煤体出现稳定的变形局部化带，且最终发展为宏观裂纹；煤体变形局部化带为一个倾斜带：刀齿截割时，变形局部化发展较慢，但产生变形局部化后，局部化带宽且带内应变值较高；而镐齿截割时，变形局部化发展较快，但产生局部化后，局部化带窄且带内应变值不如刀齿高。
• For cutting the composite lock gear with unequal tooth thickness , a study is made on the design method of gear sharper cutter with nonstandard parameter involute tooth profile and noninvolute tooth profile . the cutter tooth arrangement , the choice of teeth number of the cutter and the basic method of cutter design are discussed ; and a new method of choosing deflection factor by using limited area is presented . and the curve of relationship between rear angle on tooth crest and helical angle on tooth side of the cutter is given so as to give a basis for the gear sharper cutter to choose its parameters . to design nonstandard gear sharper cutter by adopting the method mentioned above will simplify the calculation and will increase the efficiency of design
  研究加工不等齿厚的非标准参数渐开线齿形，与非渐开线齿形复合的锁闭齿轮插齿刀刀齿的排列、刀具齿数的选择以及刀具设计的基本方法，介绍用限制区域选择插齿刀变位系数的新方法，并给出刀具齿顶后角与侧螺旋角的关系曲线，为插齿刀参数的选择提供依据.结果表明，采用上述方法设计非标准复合齿轮插齿刀，可简化计算和提高设计效率

• cutter teeth перевод